How to fix the stair carpet-pressure rod fixed stair ca […]
How to fix the stair carpet-pressure rod fixed stair carpet
The tightness of the embedded stair rod. Two fasteners are arranged at the internal corners of each step, which are buried symmetrically on the center line of the width of the stairs. The distance between the hole wall of the fastener hole and the tread surface and the kick surface of the fastener is equal, and slightly smaller than the thickness of the carpet; the length of the carpet is cut according to the sum of the actual width of the tread surface and the kick surface of each step. If you consider replacing the worn parts, you can predict Leave a certain length; lay the carpet step by step from top to bottom.
Xiangshan victor hardware supply quality pineapple stair rod for sale worldwide.
The end of the top carpet is nailed to the platform with a bead. At each step of the fastener position, a small opening is cut in the carpet to allow the pressure stair rod fastener to extend from it, and then the metal pressure rod is inserted into the fastener hole. Tighten the adjusting screws; for stairs with metal anti-skid strips, after the carpet is fixed, use expansion screws to fix the metal anti-skid strips on the edge of the outer corner of the step board, with a nail distance of 15-30cm.